| Forum: | Team 3DNow! SETI |
| Topic: | Way off-topic: New custom built computer |
|
|
|
*If HTML and/or UBB Code are enabled, this means you can use use HTML and/or UBB Code in your message.
| Name | Post |
| DanBall |
 posted 06-02-2000 23:02 ET (US)
As of 06-02-2000 this is what I plan on building my computer with: From Allstarshop From Wholesale-club From Wal-Mart From Best-buy Already have: When the AMD socket A processors and motherboards come out this will change. [This message has been edited by DanBall (edited June 03, 2000).] |
| Intelman34 |
posted 06-03-2000 22:56 ET (US)
Nice PC!! Now you gotta crank that 550mhz up to 749mhz+ with 1/2speed L2 cache like me  . You may find yourself wanting 256mb ram tho.
------------------ |
| DanBall |
posted 06-04-2000 12:11 ET (US)
If ABIT doesn't come out with a Socket A board by the time I build this (I think they will), what motherboard should I use for socket A. At http://www.lynncomp.com / they have 5 motherboards for socket A, they are: Asus A7V VIA KT133 They also have the price listed for the durons, they are: 600MHz: $89.00 |
| Postmand_Per |
posted 06-04-2000 13:04 ET (US)
It's kinda hard to recommend a motherboard when it hasn't been released yet and no reviews of it is available... ------------------ |
| Postmand_Per |
posted 06-09-2000 16:08 ET (US)
DanBall, http://www.anandtech.com/showdoc.html?i=1254 <- Preview of Socket-A motherboards. ------------------ |
| DanBall |
posted 07-23-2000 15:03 ET (US)
As of 9-12-2000 this is what my new computer will be/has: From Allstarshop From local retailer From Target Already have: From Allstarshop
From Axiontech [This message has been edited by DanBall (edited September 13, 2000).] |
| DanBall |
posted 09-13-2000 12:38 ET (US)
Just keeping this active |
| SubZero |
posted 09-17-2000 23:13 ET (US)
Dan, Make sure there is enough room to mount the KT7 in that case. I just built a new computer with the KT7-Raid and it's a big board. I had a Mid-Tower, but it only left about 1 inch of spare room, so I had to order a new case. I went with the InWin Q500N Full Tower. Super nice case with good 300W supply, a ton of bays and room for 4 case fans right off the bat. Only $77 too! |
| DanBall |
posted 09-18-2000 12:14 ET (US)
Well, don't worry, since I have both the board and case, I already have it in, it fits nicely because the case can fit ATX boards up to 12"x13" and the KT7/KT7-RAID is 12"x9.5". If you look a little more, under what I have, this means I already have it in the case. The case is the SuperPower Zephyr KS-201XP. Mid-Tower ATX 300 watt PS 4 5.25" bays 2 ext 3.5" bays 1 int 3.5" bay front case fan |
All submissions are copyrighted by their respective authors and are not for re-use in any form without their explicit written consent.
Powered by: Ultimate Bulletin Board, Version 5.37
© Madrona Park, Inc., 1998-1999.