UBBFriend: Email This Page to Someone!
Get 3DNow! Message Board
Team 3DNow! SETI
600mhz duron@1100mhz
profile | register | preferences | faq | search
|
UBBFriend: Email This Page to Someone!
|
Get 3DNow! Message Board Team 3DNow! SETI 600mhz duron@1100mhz
|
| Author | Topic: 600mhz duron@1100mhz |
| fredro Priest of Athlon |
 posted August 04, 2000 03:20  
http://www.overclockzone.com/benz/cpu/duron1100/en.html makes me want a duron. :-) IP: Logged |
| Cruncher Follower of Athlon |
posted August 14, 2000 23:30
All that for a Duron?? They should've used a T-bird! Gotta admit though, that is insane that it even worked at 1.2 Ghz amazing, really amazing IP: Logged |
| Mort Follower of Athlon |
posted August 15, 2000 23:05
Today I picked up a 600mhz duron and a ASUS A7V  .
So far I've had only one problem, which was fitting the board into the case, due to the size of the thing. I let it run at 600 for a few hours then could resist no longer. So I coloured in the L1 golden bridges with a HB pencil and, well, now its running at 800 at default voltage. I did have it at 840 (105fsb) but once windows had loaded I got a message about a registry error. So I took it back down to 800, at least until I can find a decent heatsink/fan. IP: Logged |
| NexuS Wish I had an Athlon |
posted September 01, 2000 03:02
anybody got any figures about seti on a athlon 700 750 800 850?? i'm running one at 750 and it seems to me that with a multyplier of 3.75 i'm getting a lotof waitstates with my memory IP: Logged |
| fredro Priest of Athlon |
posted September 10, 2000 17:13
i just got a gfd and overclocked my athlon 650 to 800 using 1.75v and 1/2 L-2 cache. i may try for 850 mhz later. IP: Logged |
| DanBall Follower of Athlon |
posted September 11, 2000 09:42
I finally got the marks on the L1 bridges thick enough to allow me to change the multiplier in the KT7-RAID bios. For a while the marks weren't thick enough to allow changing, but I kept trying and it finally works. I was able to get my 600MHz Duron to 900MHz, and once I got it to 1GHz, but I got a bios checksum error. IP: Logged |
| fredro Priest of Athlon |
posted September 12, 2000 12:50
thats a great oc danball. i just hit 840mhz today using ohadas cache devider. this cpu isnt even warm yet, i believe if i change to 2/5 by soldering i may hit 900mhz or more. i just need to get brave enough to solder. IP: Logged |
| DanBall Follower of Athlon |
posted September 12, 2000 16:58
In the BIOS it says my CPU is running at 109F to 113F at 600MHz@1.5v, but going up to 900MHz@1.75v it is something like 134F IP: Logged |
| wl6538 Follower of Athlon |
posted September 12, 2000 18:24
DanBall can you oc even higher with a 1.85V voltage? What comment can you make on the reviews floting on the web saying the Durons's core can crack under the heatsink? Was it esay to install or do you have to be real careful? IP: Logged |
| DanBall Follower of Athlon |
posted September 13, 2000 12:16
Sure I can go up to 1.85v (with the KT7/KT7-RAID) with my Duron. I've heard that the Epox 8KTA lets you go as high as 2.05v. Yes the Duron was easy to install, and I have taken the CPU in and out of the socket several times and put the Heat Sink back on and off several times as well without ever damaging it. IP: Logged |
| SubZero Follower of Athlon |
posted September 17, 2000 23:18
I just installed my new Duron, and no problems here. I was extra careful after hearing all the horror stories, it went on pretty easy using an Alpha FCPAL35T. Overclocking note: It was a Duron 750 and has been running stable at 900 since day 1 with a voltage increase to 1.75V I got it to boot at just over 1GHz, but brought it back down for stability. CPU Temp is listed at 100F. IP: Logged |
| NiteOwl Wish I had an Athlon |
posted September 18, 2000 02:26
Just curious. Any of you folks tried the beta 2.7X GUI on any T-bird/Durons? I am hearing about kick ass WU times in the 3 hr range. IP: Logged |
| fredro Priest of Athlon |
posted September 18, 2000 16:05
ive got 2.7 on my classic 650@848 and i`m getting 4hrs 40min average, and a best of 3hrs 45min IP: Logged |
| NiteOwl Wish I had an Athlon |
posted September 19, 2000 11:22
taking names and kicking butts, eh Fredo? 
IP: Logged |
| Franklin A. Childers Follower of Athlon |
posted September 19, 2000 18:22
He sure is. I wonder who's name is next on his list? Who ever it is, Go Get Him!!! - Frank IP: Logged |
| DanBall Follower of Athlon |
posted September 20, 2000 12:12
I found out that I can get my 600MHz Duron to run at 500MHz, 1.100v and 3.20v I/O, and the computer will still POST, and with a temperature of approx 89-93F. It will even run at 600MHz at the same voltages. The system itself runs at 80-84F. The usual temperature is 109-114F while running at 600MHz, 1.500v, and 3.30v I/O. Whether or not it will work in Windows, I don't know, I'm not finished building the computer. The highest I can get the CPU to run is 981MHz (9.0x109) at 1.600v and 3.3v I/O and a temperature of approx 134F, after that I get a BIOS Checksum error. ******EXTRA****** [This message has been edited by DanBall (edited September 20, 2000).] IP: Logged |
| DanBall Follower of Athlon |
posted September 29, 2000 10:01
My 600MHz Duron will finish a WU in approximately 8:30 to 9:30 max if left alone, and this is at default speed. IP: Logged |
| fredro Priest of Athlon |
posted September 29, 2000 19:18
hey danball, why dont you put that duron on our team so we can all enjoy watching it perform? 
IP: Logged |
| DanBall Follower of Athlon |
posted September 29, 2000 22:00
I might think about it. What do I do if I want to join since you seem to be so insistent about it. IP: Logged |
| fredro Priest of Athlon |
posted September 29, 2000 22:44
click here http://setiathome.ssl.berkeley.edu/cgi-bin/cgi?cmd=team_lookup&name=team+3dnow%21 click join. and welcome to the team.
IP: Logged |
| DanBall Follower of Athlon |
posted September 30, 2000 15:45
If any of you want to see how fast my memory speed is on my ABIT KT7-RAID with 128MB KingMax TinyBGA PC150 SDRAM is with the Duron at 600MHz, go here, or look at this: 
IP: Logged |
| fredro Priest of Athlon |
posted October 03, 2000 09:28
DanBall, do you need more help joining the team? i will be happy to help you. icq me or email if you have problems, i work the night shift, so my replys may be slow.
------------------ IP: Logged |
| DanBall Follower of Athlon |
posted October 03, 2000 14:24
I just joined the team. Only 3 (as of the time I posted this) are from the 600MHz Duron so far. I sometimes can do 2 WU a day. In don't leave it on at night because the power LED is too bright. [This message has been edited by DanBall (edited October 03, 2000).] IP: Logged |
| fredro Priest of Athlon |
posted October 03, 2000 16:32
welcome danball. IP: Logged |
| Trickster Wish I had an Athlon |
posted October 04, 2000 10:02
Welcome aboard DanBall. Glad to see you put your units where your discussion is. As for that blindingly bright LED, have you tried a piece of tape? IP: Logged |
| DanBall Follower of Athlon |
posted October 05, 2000 01:00
I got my new HS&F for my CPU earlier today (10/4/00). The CoolerMaster DP5-6H51. The old HS&F, the CoolerMaster DP5-5G11 would have the CPU run at 113F while idle, and 123F while running SETI@home. Now with the CoolerMaster DP5-6H51 it runs 113F while running SETI@home. I think it is something like 104F idle. IP: Logged |
| DanBall Follower of Athlon |
posted October 08, 2000 21:55
I have my Duron running at 972MHz, 1.750v, and 3.50v I/O. The temperature is 134F while running SETI@home. How long and how safe is it to run it at this speed? Oh, yeah, If you want to know the memory speed at 9.0x108, just add about 64MB/s to the numbers. [This message has been edited by DanBall (edited October 09, 2000).] IP: Logged |
| All times are ET (US) | next newest topic | next oldest topic |
|
|
|
|
|
|
All submissions are copyrighted by their respective authors and are not for re-use in any form without their explicit written consent.
Powered by: Ultimate Bulletin Board, Version 5.37
© Madrona Park, Inc., 1998 - 1999.
Membaca review slot online bisa menjadi panduan yang sangat berguna. Review sering kali memberikan informasi tentang RTP slot tertinggi dan pengalaman pemain sebelumnya. Dengan memilih slot gacor yang telah direkomendasikan, peluang untuk menang dapat meningkat. Jadi, jangan lewatkan untuk memeriksa ulasan sebelum mulai bermain.
Beberapa situs kini menawarkan Slot Depo 5k sebagai pilihan deposit yang sedikit lebih tinggi, memberikan lebih banyak variasi dalam permainan dan peluang kemenangan. Meskipun sedikit lebih besar, modal ini tetap cukup terjangkau bagi banyak pemain.
Jika Anda menyukai permainan yang menggabungkan strategi dengan keberuntungan, Slot Mahjong adalah pilihan yang tepat. Permainan ini menggabungkan elemen-elemen dari permainan Mahjong klasik dengan fitur-fitur permainan slot yang menguntungkan. Setiap putaran dalam Slot Mahjong memberikan pengalaman yang berbeda, dengan berbagai peluang untuk mendapatkan kemenangan besar berkat simbol-simbol unik yang tersedia.
Menemukan platform yang tepat sangat penting bagi pemain yang ingin mendapatkan keuntungan lebih dalam bermain. Salah satu yang paling sering dicari adalah Link Slot Gacor yang memberikan akses langsung ke berbagai permainan dengan peluang menang lebih tinggi. Dengan dukungan teknologi canggih, pemain bisa menikmati pengalaman bermain yang lebih nyaman dan menguntungkan setiap saat.
Berbagai fitur menarik yang ditawarkan oleh Slot Toto membuatnya selalu menjadi favorit di kalangan pemain. Mulai dari animasi yang memukau hingga jackpot yang besar, semua elemen dalam permainan ini dirancang untuk memberikan pengalaman terbaik. Tidak hanya itu, banyaknya variasi tema juga membuat pemain tidak cepat bosan. Dengan begitu, permainan ini terus berkembang dan menarik perhatian banyak orang.
Untuk menikmati permainan togel dengan hadiah besar, penting memilih platform yang aman dan terpercaya. Salah satu rekomendasi terbaik adalah Situs Togel 2d, tempat yang ideal untuk pemain yang menginginkan hadiah besar.