![]() ![]() |
![]() ![]() ![]() ![]() ![]()
|
Author | Topic: What are your times with SETI ver 3.03? |
DanBall Follower of Athlon |
![]() ![]() ![]() I'm running the command line client ver 3.03, and my times range from 6 hours to 9 hours, 30 minutes. They aren't all that bad. I had the idea they would be in the range of 10-15 hours. IP: Logged |
DanBall Follower of Athlon |
![]() ![]() ![]() Testing ------------------ IP: Logged |
Savine Follower of Athlon |
![]() ![]() ![]() I've been running v3.03 since it came out. I have some times over 14 hrs and some under 8, but mostly they float in the 9.2-9.5 hour range. I am running an original Athlon 600 @ (oddly enough)600mhz and 196 megs of 133 Ram. IP: Logged |
DanBall Follower of Athlon |
![]() ![]() ![]() Have you ever ben able to overclock that processor? ------------------ IP: Logged |
daviddth Follower of Athlon |
![]() ![]() ![]() Celeron 500@500, not overclocked at all, 96MB PC 100 ram (Alas @ 66 until I get a better heatsink for the Celeron) I'm getting an average 13:10 to 15:30 average, with one 21:24 WU. K6-2-400, with 64MB PC100 RAM, Gigabyte GA-4AA motherboard, is getting 23:50 to 26:10 averages, with one 37:20 WU. This PC used to get 18-24 hour WU's using S@H 2.x. Dave IP: Logged |
Cruncher Follower of Athlon |
![]() ![]() ![]() My best time on the 900MHz T-Bird core (Slot A processor) on AMD 750 using PC100 memory is 6.9 hours. Average time seems to be 7.5 hours. So far there have been three work units in the 11 hour range, and those were the longest times. Looks like the new client is doing full Fourier transform analysis now instead of FFT. It takes care of two problems for Seti at Berkeley at the same time: slows everybody down from hitting and overloading their servers at U.C. Berkeley with work unit results, and they get more pulses and spikes and gaussians and better data overall. You guys want a good laugh, go check out Ars Technica's Seti benchmark page about version 3.03 client: http://www.teamlambchop.com/bench/303results.htm Gone are the dozens of PIII and Xeons with the 2.5-3.0 hour benchmark times. The top systems now are all overclocked Thunderbirds FYI, the number one time on Ars Technica is a T-Bird at 1425MHz running Win2K and CLI 3.03, 150MHz FSB, KT7 RAID, and the system time to complete the benchmark was 4:39. So much for the myth of Intel P-whatever superiority. I think even the Ars Technica guys are beginning to figure out the reality now IP: Logged |
fredro Priest of Athlon |
![]() ![]() ![]() i seem to be averaging 9 to 10 hrs on a celeron 566@850mhz. IP: Logged |
fredro Priest of Athlon |
![]() ![]() ![]() on my pentium3 600@720mhz the 1st unit took 8.5hrs IP: Logged |
Martin Follower of Athlon |
![]() ![]() ![]() Athlon 650mhz,cpu time (benchmark file, team lambchop) 9hr 1min, New Duron 750mhz@950mhz 7hr 48min, 2-2-2 Ram used. Lookup name=Martin J 1251 units so far.... Martin & Jeremy, Athlon 650, TBird 900, Duron 950 mainboard microstar K7T Turbo, Via KT133a (bios flashed to beta V1.0b16, below muitply) 143mhz frount side bus, (286ddr), Duron 750@1001 (1.85v) to hot @57c, Ram max out 3-3-3. 133mhz frount side bus (266ddr), Duron 750@933 7x (1.75v) temp 47c, Ram set to 2-2-2, seti@home cpu-time {6hr 45min} [This message has been edited by Martin (edited April 15, 2001).] IP: Logged |
fredro Priest of Athlon |
![]() ![]() ![]() 7.5 hrs on my first 2 units on my duron 700@784. IP: Logged |
Savine Follower of Athlon |
![]() ![]() ![]() Fredo, How's your Athlon doing? Did those Golden Fingures work out for you? IP: Logged |
fredro Priest of Athlon |
![]() ![]() ![]() Savine, the goldfinger worked great, and the athlons running fine. i got 840mhz out of it. i dont own it anymore though, i had to sell it back in november. IP: Logged |
Psycho Killa Follower of Athlon |
![]() ![]() ![]() I just redownloaded the new Seti and have no clue as to what my first unit will get. btw.. Hi guys -PK IP: Logged |
fredro Priest of Athlon |
![]() ![]() ![]() Psycho Killa, grab yourself a pillow and blanket. ![]() IP: Logged |
Psycho Killa Follower of Athlon |
![]() ![]() ![]() First unit I got was right near 10 hours. Not too bad. And alot faster than my old machines ![]() Btw I upgraded to a Duron 650@896MHz now. Thats alot nicer than the K6-III 450 I was running But I have access to a few Macs here at my campus. -PK IP: Logged |
Martin Follower of Athlon |
![]() ![]() ![]() SETI Timer This will help you extablish how fast the v3.03 commandline client will complete a work unit on your machine. IP: Logged |
fredro Priest of Athlon |
![]() ![]() ![]() Savine got my athlon 650 back for $150. its running great at 787mhz, using it as my main system right now. the 1st 2 wu`s came in at 8hrs 57 min and 10hrs 14min. not very impressive with seti, but its quite fast in quake3. ![]() IP: Logged |
Martin Follower of Athlon |
![]() ![]() ![]() Seti@Home Cpu times for new Thunder Bird 1333/1533Mhz/266bus/1.95v core. Mainboard micro star k7t Turbo via, kt133a chipset,hd 20.4gig diamond max 5400spin 512kcach udma66, 2x128 dimms {3-3-3}. I will be replacing memory to !Crucial 256MB PC133 CAS-2! next month hopefully this will lower my seti times. Does any member of team3dow have a ddr setup with amd761 chip set,please post seti@home times & system setup. Date Angle Tera- Time-hr [This message has been edited by Martin (edited July 05, 2001).] IP: Logged |
fredro Priest of Athlon |
![]() ![]() ![]() thats very fast ![]() IP: Logged |
All times are ET (US) | next newest topic | next oldest topic |
|
|
![]() ![]() |
All submissions are copyrighted by their respective authors and are not for re-use in any form without their explicit written consent.
Powered by: Ultimate Bulletin Board, Version 5.37
© Madrona Park, Inc., 1998 - 1999.
Membaca review slot online bisa menjadi panduan yang sangat berguna. Review sering kali memberikan informasi tentang RTP slot tertinggi dan pengalaman pemain sebelumnya. Dengan memilih slot gacor yang telah direkomendasikan, peluang untuk menang dapat meningkat. Jadi, jangan lewatkan untuk memeriksa ulasan sebelum mulai bermain.
Beberapa situs kini menawarkan Slot Depo 5k sebagai pilihan deposit yang sedikit lebih tinggi, memberikan lebih banyak variasi dalam permainan dan peluang kemenangan. Meskipun sedikit lebih besar, modal ini tetap cukup terjangkau bagi banyak pemain.
Jika Anda menyukai permainan yang menggabungkan strategi dengan keberuntungan, Slot Mahjong adalah pilihan yang tepat. Permainan ini menggabungkan elemen-elemen dari permainan Mahjong klasik dengan fitur-fitur permainan slot yang menguntungkan. Setiap putaran dalam Slot Mahjong memberikan pengalaman yang berbeda, dengan berbagai peluang untuk mendapatkan kemenangan besar berkat simbol-simbol unik yang tersedia.
Menemukan platform yang tepat sangat penting bagi pemain yang ingin mendapatkan keuntungan lebih dalam bermain. Salah satu yang paling sering dicari adalah Link Slot Gacor yang memberikan akses langsung ke berbagai permainan dengan peluang menang lebih tinggi. Dengan dukungan teknologi canggih, pemain bisa menikmati pengalaman bermain yang lebih nyaman dan menguntungkan setiap saat.
Untuk menikmati permainan togel dengan hadiah besar, penting memilih platform yang aman dan terpercaya. Salah satu rekomendasi terbaik adalah Situs Togel 2d, tempat yang ideal untuk pemain yang menginginkan hadiah besar.